Beskrivelse
Dovetail red dot sight mount for the S&W M&P .22. Compatible with red dot sights featuring the DeltaPoint Pro and Shield RMS/RMSc footprint (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & many more). The rear pins will need to be removed on the Holosun 407K/507K.
COMPATIBILITY
- S&W M&P .22 Compact
Please note: Using this mount in combination with a red dot sight will increase the weight on the slide of your firearm. This may lead to cycling issues especially in .22s.
COMPATIBLE RED DOT SIGHTS (LIST NOT EXCLUSIVE)
- Bushnell RXS-100
- Bushnell RXS-260
-
Bushnell RXU-200
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 507K*
- Jpoint
- Leupold DeltaPoint Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
- Vortex Defender-CCW
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.604"
- Overall Width: .99"
- Torque Specs: 15 in/lbs
- Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
- Red Dot Footprint: Shield RMS
INSTALLATION
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite #242 threadlocker to the provided mounting screws
- Torque mounting screws to 15in/lbs
Evolution Gun Works (EGW)
