Description
Dovetail red dot sight mount mount for the CZ Shadow 2. Compatible with Docter/Noblex footprint red dot sights, such as the Vortex Venom/Viper, Burris FastFire, Leica Tempus, Sightmark Mini Shot M-Spec, UTG OP3 Micro and many more. Mounting hardware is included.
Compatibility
- CZ 75 Shadow
- CZ 75 SP01 Shadow
- CZ Shadow 2
- Dan Wesson DWX
- Dan Wesson DWX Compact
Does NOT fit
- Shadow 2 Optics Ready
- Shadow 2 Kadet
Specifications
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.811"
- Overall Width: .99"
- Torque Specs: 15 in/lbs
Mounting Hardware (included)
- (2) 6-32 Button Head Screws
- (2) 6-32 Flat Head Screws
- (1) 6-32 Set Screw
- Note: The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.
Compatible red dot sights (list is not exclusive)
- Vortex Viper
- Vortex Venom
- Burris FastFire 2/3/4
- Docter
- ADE RD3-001*
- ADE RD3-002*
- ADE RD3-009*
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
- Sightmark Core Shot
*All ADE sights require 6-32 x 3/8" screws.
Installation
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite #242 threadlocker to the provided mounting screws
- Torque mounting screws to 15in/lbs
Evolution Gun Works (EGW)
